Our laboratory has experience with dynamic impact testing of a wide range of engineering materials, including:
- Thin PVD and CVD coatings on tough substrates
- Wear-resistant and protective coatings, including nanocomposite coatings
- Duplex systems (e.g. thin coatings deposited on nitrided steels)
- Thermal spray coatings (HVOF, HVAF, plasma spray, etc.)
- Cold spray coatings
- Bulk metallic materials and alloys (iron, steels, aluminium alloys, bell bronze, Ti-6Al-4V), cermets (WC/Co), and ceramics (YSZ)
- Additively manufactured metallic materials produced by SLM, WLAM, and WAAM
- Materials after post-processing (e.g. heat treatment, age hardening, laser peening)
- Weld overlays and hardfacing deposits
- Polymer-based composites (GFRP)
If your material is not included in this list, it may still be suitable for dynamic impact testing. Where appropriate, the evaluation methodology can be adapted to the specific behaviour of the tested material. Upon request, additional analyses outside the scope of our laboratory (e.g. EDX, EBSD, etc.) can be arranged through collaborating laboratories. Testing under non-standard conditions, such as elevated atmospheric humidity, can also be discussed.
Selected references:
Daniel, J., Šebestová, H., & Mrňa, L. (2026). Repeated impact resistance of Stellite 6 hardfacing layer produced by gas metal arc welding. Progress in Additive Manufacturing, 11, 4867-4880. https://doi.org/10.1007/s40964-026-01628-5
Poloprudský, J., Sobola, D., Daniel, J., Grossman, J., & Kruml, T. (2025). Effect of repeated solid impact on bulk metallic materials. Surfaces and Interfaces, 62, 106159. https://doi.org/10.1016/j.surfin.2025.106159
Daniel, J., Houdková, Š., Duliškovič, J., & Grossman, J. (2023). Impact wear of the Co-based HVOF-sprayed coatings. Tribology International, 187, 108755. https://doi.org/10.1016/j.triboint.2023.108755
Kovářík, O., Daniel, J., Cížek, J., Kondás, J., Čech, J., Siegl, J., & Singh, R. (2022). Fatigue properties of cold sprayed bell metal. In Proceedings of the International Thermal Spray Conference (ITSC 2022) (pp. 622-630). ASM International. https://doi.org/10.31399/asm.cp.itsc2022p0622
Joska, Z., Rak, L., Daniel, J., Horníček, J., Tříska, V., & Nguyen, C. H. (2020). Adhesion of PVD coatings on surface of small arm. ECS Transactions, 99(1), 265-273. https://doi.org/10.1149/09901.0265ecst
Daniel, J., Grossman, J., Houdková, Š., & Bystrianský, M. (2020). Impact wear of the protective Cr₃C₂-based HVOF-sprayed coatings. Materials, 13(9), 2132. https://doi.org/10.3390/ma13092132
Daniel, J., Souček, P., Grossman, J., Zábranský, L., Bernátová, K., Buršíková, V., Fořt, T., Vašina, P., Sobota, J. (2020). Adhesion and dynamic impact wear of nanocomposite TiC-based coatings prepared by DCMS and HiPIMS. International Journal of Refractory Metals and Hard Materials, 86, 105123. https://doi.org/10.1016/j.ijrmhm.2019.105123
Daniel, J., Žemlička, R., Grossman, J., Lümkemann, A., Tapp, P., Galamand, C., & Fořt, T. (2020). Comparison of lifetime of the PVD coatings in laboratory dynamic impact test and industrial fine blanking process. Materials, 13(9), 2154. https://doi.org/10.3390/ma13092154
Sobota, J., Grossman, J., Buršíková, V., Dupák, L., & Vyskočil, J. (2011). Evaluation of hardness, tribological behaviour and impact load of carbon-based hard composite coatings exposed to the influence of humidity. Diamond and Related Materials, 20(4), 596-599. https://doi.org/10.1016/j.diamond.2011.01.011